PROMASPRAY® F5T

ADVANTAGES

  • Fire resistance for up to 240 minutes
  • Applied by plastering techniques enabling repairs to be completed without the need to introduce spray plant onto the site
  • Durable solution
  • Resistant to impact damage
  • May be levelled to present a trowelled finish
  • Can be easily removed and reinstated locally when additional fixings are required

Integrated fire protective coating system

PROMASPRAY ® F5T is a trowel applied, factory controlled premix based on vermiculite and Portland cement. It is used with potable water added on site.

PROMASPRAY® F5T will not fail suddenly after the prescribed fire resistance period but will continue to offer a predictable level of fire protection for the duration of the fire.

PROMASPRAY® F5T is ideal for application by trowel in interior and fully exposed environments.
Properties & Performances
< #Back#

PROPERTIES & PERFORMANCES

Colour and finish Off-white. Strictly trowel finished only
Minimum practical thickness

5/16in (8mm) when unreinforced, 1/2in (13mm) when reinforced

Number of coats
One or more as required
Cure
By hydraulic set
Flash point
None
Density (Nominal)

Typical 42.1pcf (675kg/m3) in accordance with BS 8202: Part 1: 1987

Thermal conductivity

1.39BTU in/hr ft2 (0.20W/mK) at 68°F (20°C)

pH value
12.0 - 12.5

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

PROPERTIES & PERFORMANCES

Colour and finish Off-white. Strictly trowel finished only
Minimum practical thickness

5/16in (8mm) when unreinforced, 1/2in (13mm) when reinforced

Number of coats
One or more as required
Cure
By hydraulic set
Flash point
None
Density (Nominal)

Typical 42.1pcf (675kg/m3) in accordance with BS 8202: Part 1: 1987

Thermal conductivity

1.39BTU in/hr ft2 (0.20W/mK) at 68°F (20°C)

pH value
12.0 - 12.5

All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

Preparation & Application
< #Back#

PREPARATION


Typical substrates

Existing PROMASPRAY® F5, concrete, unprimed and primed steel. Concrete curing agents should not be used.

Substrate preparation The substrate must be clean, dry and free from visible moisture (including condensation), concrete laitance, formwork release oils, loose millscale, loose rust and any other condition preventing good adhesion.
Any other priming systems must be compatible with an alkaline pH of 12.0-12.5.

APPLICATION


Limitations

PROMASPRAY® F5 may be applied when the substrate and air temperature are at least 36°F (2°C) and rising, but should not be applied if the substrate or air temperatures are less than 39°F (4°C) and falling. Maximum substrate and air temperature is 113°F (45°C).

Substrate temperature should be at least 36°F (2°C) above dew point temperature.

PREPARATION


Typical substrates

Existing PROMASPRAY® F5, concrete, unprimed and primed steel. Concrete curing agents should not be used.

Substrate preparation The substrate must be clean, dry and free from visible moisture (including condensation), concrete laitance, formwork release oils, loose millscale, loose rust and any other condition preventing good adhesion.
Any other priming systems must be compatible with an alkaline pH of 12.0-12.5.

APPLICATION


Limitations

PROMASPRAY® F5 may be applied when the substrate and air temperature are at least 36°F (2°C) and rising, but should not be applied if the substrate or air temperatures are less than 39°F (4°C) and falling. Maximum substrate and air temperature is 113°F (45°C).

Substrate temperature should be at least 36°F (2°C) above dew point temperature.

Additional Data
< #Back#

PACKAGING

50lb (22.7kg) bags.

STORAGE

  • Off the ground and kept dry until ready for use.
  • Protect from frost, excessive heat–above 113ºF (45ºC)–and strong radiant sunlight.

SHELF LIFE

Maximum 12 months.

ENVIRONMENTAL

  • Do not discharge into drains, watercourses or soil. 
  • Not readily biodegradable. 
  • Not expected to bioaccumulate. 
  • Not expected to be toxic to aquatic life except at high concentrations.

PACKAGING

50lb (22.7kg) bags.

STORAGE

  • Off the ground and kept dry until ready for use.
  • Protect from frost, excessive heat–above 113ºF (45ºC)–and strong radiant sunlight.

SHELF LIFE

Maximum 12 months.

ENVIRONMENTAL

  • Do not discharge into drains, watercourses or soil. 
  • Not readily biodegradable. 
  • Not expected to bioaccumulate. 
  • Not expected to be toxic to aquatic life except at high concentrations.
Quality Assurance
< #Back#

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

QUALITY ASSURANCE

Promat products are manufactured to stringent quality control systems to assure that our customers receive materials made to the highest standards. 

Operating to these standards means that all activities, which have a bearing upon quality, are set out in written procedures. 

Systematic and thorough checks are made on all materials and their usage. Test equipment is subjected to regular checks and is referred back to national standards.

The information given in this data sheet is based on actual tests and is believed to be typical of the product. No guarantee of results is implied however, since conditions of use are beyond our control.

Health & Safety
< #Back#

HEALTH & SAFETY

Adequate ventilation must be provided during use. Avoid contact with the skin and eyes by using eye protection, gloves, barrier cream and a face mask.

If the product comes into contact with the skin, wash immediately with soap and water. If the eyes are affected, flush with plenty of water and seek medical attention immediately.

A safety data sheet is available from Promat upon request.

Promat activities are conducted with due regard to all statutory requirements with appropriate safeguards against exposing employees and the public to health and safety risks.

HEALTH & SAFETY

Adequate ventilation must be provided during use. Avoid contact with the skin and eyes by using eye protection, gloves, barrier cream and a face mask.

If the product comes into contact with the skin, wash immediately with soap and water. If the eyes are affected, flush with plenty of water and seek medical attention immediately.

A safety data sheet is available from Promat upon request.

Promat activities are conducted with due regard to all statutory requirements with appropriate safeguards against exposing employees and the public to health and safety risks.

Documents
< #Back#

Product datasheets

Product Data Sheets for Americas

Americas version

Product datasheets

Product Data Sheets for Americas

Americas version