MICROTHERM® QUILTED-1200

ADVANTAGES

  • Custom made & very flexible
  • Extremely low thermal conductivity
  • Non combustible
  • Shock & vibration resistant
  • Clean & easy to install
  • Environmentally friendly
  • Resistant to most chemicals

Flexible panels

The MICROTHERM® QUILTED range of products are custom made flexible microporous insulation panels with very good thermal properties. The panels are produced in a glass cloth outer envelope, making them clean & easy to handle. Stitching is two-directional (3D flexure). The formulation is an opacified blend of filament reinforced pyrogenic alumina.

MICROTHERM® QUILTED-1200 is a very flexible, alumina based, custom made insulation panel which is capable of withstanding peak temperatures of 1200 °C.

Technical data
< #Back#


 MICROTHERM® QUILTED
Grade
-1000R -1000R HY
-1200
Classification temperature °C 
1000 1000
1200
Bulk density kg/m3
220 260 350
Shrinkage @1000 °C – 24h full soak, %  
< 3
< 3
< 0.1
Thermal conductivity @600 °C mean, W/m.K 
0.039
0.039
0.050
Compressive strength (ASTM C 165), N/mm2  0.10 0.12 0.22


 MICROTHERM® QUILTED
Grade
-1000R -1000R HY
-1200
Classification temperature °C 
1000 1000
1200
Bulk density kg/m3
220 260 350
Shrinkage @1000 °C – 24h full soak, %  
< 3
< 3
< 0.1
Thermal conductivity @600 °C mean, W/m.K 
0.039
0.039
0.050
Compressive strength (ASTM C 165), N/mm2  0.10 0.12 0.22
Product dimensions & size availability
< #Back#
Although there are some standard stock sizes available, MICROTHERM® QUILTED can be custom made according customer specifications. Please contact your regional Promat agency to request your MICROTHERM® QUILTED sizes.
The standard thickness range is from 3mm up to 10mm. Additionally, thicknesses lower than 3mm and up to 15mm are available on request.
Although there are some standard stock sizes available, MICROTHERM® QUILTED can be custom made according customer specifications. Please contact your regional Promat agency to request your MICROTHERM® QUILTED sizes.
The standard thickness range is from 3mm up to 10mm. Additionally, thicknesses lower than 3mm and up to 15mm are available on request.
Production tolerances
< #Back#
Length mm  
   ± 3
Width mm 
   ± 3
Thickness mm         ± 0.5    


 

Length mm  
   ± 3
Width mm 
   ± 3
Thickness mm         ± 0.5    


 

Working & processing
< #Back#
MICROTHERM® QUILTED can be shaped easily with a simple cutter (the procedure can be found in our handbook on microporous insulation). The panels can be fixed in place with glue or by mechanical means such as anchors, pins and clips.
MICROTHERM® QUILTED can be shaped easily with a simple cutter (the procedure can be found in our handbook on microporous insulation). The panels can be fixed in place with glue or by mechanical means such as anchors, pins and clips.
Typical applications
< #Back#
Microporous insulation offers an extremely low thermal conductivity, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified:

  • 3D geometries
  • Aerospace
  • Automotive
  • Small radius pipe insulation
  • R&D centres - advanced research
Microporous insulation offers an extremely low thermal conductivity, close to the lowest theoretically possible at high temperatures. Microporous materials are the preferred choice when a large temperature reduction is required within a limited space, or when strict heat loss or surface temperature requirements are specified:

  • 3D geometries
  • Aerospace
  • Automotive
  • Small radius pipe insulation
  • R&D centres - advanced research