MONOLUX®-800

ADVANTAGES

  • Low thermal conductivity
  • High mechanical strength
  • Resistance to moisture and chemicals
  • Excellent machinability to close tolerances
  • Tough and durable
  • Dust free surface
  • Asbestos free


Structural calcium silicates

MONOLUX® materials are rigid insulation boards with a low thermal conductivity. They are specifically formulated without asbestos and mineral fibres. MONOLUX® products have low shrinkage and high strength and therefore provide effective and stable insulation solutions for industrial applications

MONOLUX®-800 boards are strong rigid insulation boards ideally suited for applications where good insulation values and high mechanical resistance are required.

Applications

Technical data
< #Back#


 MONOLUX®
Grade
-500 -800
Classification temperature °C 
900 1000
Bulk density kg/m3 
770 950
Shrinkage @CT – 12h full soak, %  
< 0.4
< 0.4
Thermal conductivity @600 °C mean, W/m.K 
0.25
0.25
Compressive strength (ASTM C 165), N/mm2  13 27 N/mm2  


 MONOLUX®
Grade
-500 -800
Classification temperature °C 
900 1000
Bulk density kg/m3 
770 950
Shrinkage @CT – 12h full soak, %  
< 0.4
< 0.4
Thermal conductivity @600 °C mean, W/m.K 
0.25
0.25
Compressive strength (ASTM C 165), N/mm2  13 27 N/mm2  
Product dimensions & size availability
< #Back#
Length mm   
  2440
Width mm  
  1220
Thickness mm       12.7, 20, 25, 30, 50 

Other sizes and shaped parts are available on request.

Length mm   
  2440
Width mm  
  1220
Thickness mm       12.7, 20, 25, 30, 50 

Other sizes and shaped parts are available on request.

Production tolerances
< #Back#
Length mm 
  ± 5.0
Width mm  
  ± 5.0
Thickness mm       + 0/- 0.8   


 

Length mm 
  ± 5.0
Width mm  
  ± 5.0
Thickness mm       + 0/- 0.8   


 

Working & processing
< #Back#
MONOLUX®-800 products can be accurately machined with special processing machinery and appropriate equipped tools. The fine material structure allows the production of precision machined parts. They can be easily fixed in place by screws or Tucker Fasteners. When using screws, slot holes should be included. 

When cutting to size, the maximum recommended workplace concentration for dust generation must be observed. We advise local dust extraction in the cutting zone.
MONOLUX®-800 products can be accurately machined with special processing machinery and appropriate equipped tools. The fine material structure allows the production of precision machined parts. They can be easily fixed in place by screws or Tucker Fasteners. When using screws, slot holes should be included. 

When cutting to size, the maximum recommended workplace concentration for dust generation must be observed. We advise local dust extraction in the cutting zone.
Typical applications
< #Back#
MONOLUX® materials are used in various applications:

  • Platen press insulation
  • Load bearing pipe supports
  • Heat shields
  • Structural thermal breaks
  • Furnace bottom boards
MONOLUX® materials are used in various applications:

  • Platen press insulation
  • Load bearing pipe supports
  • Heat shields
  • Structural thermal breaks
  • Furnace bottom boards